imfdb.org  

Go Back   imfdb.org > The Forum > Just Guns

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #27  
Old 05-12-2018, 05:49 PM
S&Wshooter's Avatar
S&Wshooter S&Wshooter is offline
Senior Member
 
Join Date: Dec 2009
Location: Texas
Posts: 4,860
Default

Not sure what your first point is meant to be since I basically said "untrained+SAO=carrying hammer down (regardless of whether or not chamber is empty)", and that for a SAO handgun you have exactly 2 options, of which one might not like either, as compared to the plethora of ergonomic options with DA/SA (and now striker guns but I was more talking about BEFORE they became so ubiquitous)

The US Army is indeed slow, but if the money had been there in 1955 (remember, the Korean Armistice had just been signed so the US was just coming out of a war, and the M14 was just then being adopted, among other new, costly, developments), there's a good chance there would have been a switch to a 9mm DA/SA, be it the S&W X100, the Colt T4, or the High Standard T3, the impetus for this being the Walther P38. From everything I can tell, though, from WW2 to the end of Vietnam, it really seems to me that anyone that could had a DA revolver or DA/SA pistol, then out of those remaining that were issued sidearms, a significant amount were plainly issued a .38 DA revolver (Colt, S&W, Ruger later on). From 1947 all the way through 1985 adoption of the M9, every time the US military looked at new handguns, they were to be 9mm; I don't think it was specifically to appease NATO.

The 5-6 shot comment refers to the fact for most of the previous century, if you did not want a single action pistol, your options were either a 5 or 6 shot revolver OR a DA pistol. You forget we're not just talking about military sidearms, but also those of the police, who in the US went DA revolver->DA/SA pistol->striker, with most private duty pistol purchases being DA revolvers and DA/SA pistols (such as the Beretta 92 series, S&W 2nd and 3rd gen autos, Ruger P series, and SIG's P22x series) before striker fired guns dominated everything.

You can't really consider a gun ready to fire if you have to take additional actions to make it shoot, past pulling the trigger. Also keep in mind the 1911 in military service always had a small, easily missed safety, and the BHP was generally carried with nothing in the chamber and the hammer down. I don't think that really counts as "ready", especially under stress or if you need to be quick. At least with a (military, semi auto) rifle, the safety is usually big and/or doesn't require you to shift your grip at all. And with a DA/SA, decocking is done as part of loading the gun, and can be skipped if you're reloading during a course of fire/combat, as opposed to having to be done after drawing, before you can shoot

It's disingenuous to say that DA/SA pistols have to have the safety removed to fire since you are not intended to carry them with the safety on; the safety on a DA/SA is only for decocking and storage, unlike an SAO, for which it's required if there's a round in the chamber. As for safety-less DA's besides the SIG not having been adopted, the HK offerings with LEM triggers, Walther P99 and PPQ, Canik whatevers in use by Turkish police, and the Beretta 92G beg to differ.

To put it in plain English since you seem to think otherwise, DA/SA PISTOLS ARE MEANT TO BE CARRIED ON "FIRE", ROUND IN THE CHAMBER, HAMMER DOWN. Just because the gun goes on Safe when decocking doesn't mean it's supposed to stay that way, you put it on Fire before holstering. To assert otherwise would be like saying you should carry a revolver with the hammer back just because it's possible. Just because you can, doesn't mean you are meant to or even should

DA/SA is super easy, all you have to do is decock and put the gun back on fire when you load it, which takes less than a second and generally has a HUGE button or lever to do so. As for the first shot being a little different, that doesn't really matter all that much, and if it throws someone off they still have 7-20 rounds in single action to put into the aggressor. In any case, if someone can't handle that, they're probably not going to be able to handle remembering to take the gun off safe as they draw (SAO), reloading with a speedloader under stress (revolver), learning trigger discipline (all, but most important with striker guns based on how often people ND them), or unloading the gun before pulling the trigger to disassemble (striker). And for people supposedly well versed with handguns, if they can do any of the above but not learn how to operate and shoot a DA/SA, maybe they're not nearly as well versed as they thought (see: 9/10 people that complain about DA/SA, slide mounted safeties, polymer guns, anything that isn't a 1911) and would benefit from a trip to a range that rents handguns just to familiarize themselves with guns different than what they prefer.

TL;DR: just because it isn't a Glock or 1911 doesn't mean it's bad, go shoot different guns
__________________
Get off of my property


http://www.introvertisland.com
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:22 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.