Cylinder not closing on my revovler.....

[Evil Tim]

Originally Posted by Yournamehere

To my knowledge there are no springs that will fly out of the gun, they should all be contained. The hammer block may come loose but that isn't spring loaded and is easily placed back in. Again, though, this is based on my opening of a S&W K-Frame revolver.

Yeah, but from experience it's always a good idea to assume anything mechanical you take apart will have a tiny springy thingy that will fly under the hardest thing in the room to move and take precautions to that effect. If you don't, it always will.

[Gunmaster45]

Originally Posted by Evil Tim

Yeah, but from experience it's always a good idea to assume anything mechanical you take apart will have a tiny springy thingy that will fly under the hardest thing in the room to move and take precautions to that effect. If you don't, it always will.

Airsoft guns are put together in a way that makes disassembly/reassembly very difficult. All the parts kind of hold together at once, and if you don't have 7 hands or a machine to hold those parts, you've likely ruined the gun by taking it apart.

Real guns are designed to be stripped when needed, airsoft guns... I don't know what they were thinking with most of them.