imfdb.org  

Go Back   imfdb.org > The Forum > Just Guns

Reply
 
Thread Tools Display Modes
  #1  
Old 08-29-2017, 01:14 PM
Spartan198's Avatar
Spartan198 Spartan198 is offline
Senior Member
 
Join Date: Mar 2009
Location: The scorched state of California
Posts: 2,305
Default Glock Gen 5 to be available soon

http://www.thefirearmblog.com/blog/2...kly+Newsletter

It's basically just the same as their -M series military/LE pistols, though.
__________________
"Everything is impossible until somebody does it - Batman

RIP Kevin Conroy, the one true Batman
Reply With Quote
  #2  
Old 08-29-2017, 06:54 PM
Excalibur's Avatar
Excalibur Excalibur is offline
IMFDB Admin
 
Join Date: Nov 2008
Location: USA
Posts: 3,842
Send a message via AIM to Excalibur Send a message via MSN to Excalibur Send a message via Yahoo to Excalibur
Default

Not really impressed. If they somehow many the mag release button ambi instead of just reversible, I'd be a bit more impressed. They didn't follow the trend of front cocking serrations even though they are releasing Gen 4s with them. They could have made the peep holes in the mag bigger
__________________

"There's a fine line between not listening and not caring...I like to think I walk that line everyday of my life."

Blessed be the LORD, my rock, Who trains my hands for war, And my fingers for battle
Psalm 144:1

“It is always wrong to use force, unless it is more wrong not to.”
Reply With Quote
  #3  
Old 08-30-2017, 12:58 AM
Mazryonh Mazryonh is offline
Senior Member
 
Join Date: Feb 2010
Posts: 290
Default

What kind of perfection needs 5 versions to get right?

Why, it's "Glock Perfection," of course!

Does the Gen 5 release mean that Gen 4's production time will be short-lived?
Reply With Quote
  #4  
Old 08-30-2017, 02:40 AM
Jcordell Jcordell is offline
Formerly "Checkman"
IMFDB Admin
 
Join Date: Nov 2008
Location: Idaho
Posts: 1,034
Default

Quote:
Originally Posted by Mazryonh View Post
What kind of perfection needs 5 versions to get right?

Why, it's "Glock Perfection," of course!

Does the Gen 5 release mean that Gen 4's production time will be short-lived?
I like my G19 Gen 4. I hope my agency lets us older officers keep the Gen 4.
Reply With Quote
  #5  
Old 08-30-2017, 08:46 PM
Excalibur's Avatar
Excalibur Excalibur is offline
IMFDB Admin
 
Join Date: Nov 2008
Location: USA
Posts: 3,842
Send a message via AIM to Excalibur Send a message via MSN to Excalibur Send a message via Yahoo to Excalibur
Default

I just recently test fire this gun at my local gun range. I shot the G19 one.

Didn't noticed the lack of finger grooves much, but the flared magwell did force my grip to change just a bit. The gap in the front bottom of the grip is noticeable. Other than the orange follower that reminded me of the Glock mags, there's nothing really different. My shots are pretty descent so I did not notice anything real different, though I hate the Glock sights since I don't have them on my G19. Everything else about it feels the same. I didn't accidentally hold the slide stop up by accident. The present of an ambi slide stop was a bit irrelevant to me since I don't use the slide stop to release it during reloads. I understand why but without the present of a true ambi mag release, I feel this thing was half designed and they just slapped whatever was easier for their factory to make.
__________________

"There's a fine line between not listening and not caring...I like to think I walk that line everyday of my life."

Blessed be the LORD, my rock, Who trains my hands for war, And my fingers for battle
Psalm 144:1

“It is always wrong to use force, unless it is more wrong not to.”
Reply With Quote
  #6  
Old 10-10-2017, 10:17 PM
MT2008's Avatar
MT2008 MT2008 is offline
IMFDB & Forum Admin
 
Join Date: Nov 2008
Posts: 2,619
Default

Quote:
Originally Posted by Spartan198 View Post
http://www.thefirearmblog.com/blog/2...kly+Newsletter

It's basically just the same as their -M series military/LE pistols, though.
Actually, the Gen 5 and the "M" series are not the same, contrary to my expectations (I would have figured that "M" was just an early designation for the FBI's Gen 5 guns before the latter hit the commercial market). I had the chance to handle both versions at a trade show recently, and I asked the Glock rep what's the difference. The "M" series have different barrels and different finishes on most of the parts than the Gen 5. I personally couldn't see any difference other than slide markings, even when I held a -17M and a -17 Gen 5 in each hand, but I trust that the guy knew what he was talking about.

Personally, I'm glad that they finally got rid of the finger grooves (aside from reminding me of the Gen 2s, it simply feels better in my hand), but there are still some things I feel could have been done better. I don't know why they haven't standardized extended slide releases yet, for example - the factory slide releases have always been too small. I'm debating whether to buy a Gen 5 G19, which would be the first G19 I own. (Right now, I have all the other major 9mm variants except the -19.)

Quote:
Originally Posted by Mazryonh View Post
Does the Gen 5 release mean that Gen 4's production time will be short-lived?
I doubt it; they haven't even stopped producing most of the Gen 3 models yet (which is impressive, when you consider that the Gen 3s have been around since the Clinton White House). Also, I asked if there were plans to introduce the .40-caliber models in Gen 5, and the Glock rep told me probably not yet - because they also got rid of the locking block pin (another throwback to the Gen 2 days), which was primarily added for the .40-caliber and .357 SIG Glocks. So at the very least, they'll have to keep producing Gen 4 Glocks in the larger calibers until they solve the engineering challenges associated with removing the locking block pin on the 9mm Gen 5s.
__________________
Cry "Havoc," and let slip the hogs of war.

Last edited by MT2008; 10-10-2017 at 10:29 PM.
Reply With Quote
  #7  
Old 10-10-2017, 11:12 PM
Jcordell Jcordell is offline
Formerly "Checkman"
IMFDB Admin
 
Join Date: Nov 2008
Location: Idaho
Posts: 1,034
Default

There comes a time in one's life when it just isn't important to buy the next year's model. Unless I have no choice I'm sticking with my G19-gen 4. I can start collecting my full pension on July 1, 2024. I don't see the need for the next variation with only 7 years left. Do I really have to change models....again?
Reply With Quote
  #8  
Old 10-11-2017, 07:16 AM
Spartan198's Avatar
Spartan198 Spartan198 is offline
Senior Member
 
Join Date: Mar 2009
Location: The scorched state of California
Posts: 2,305
Default

Quote:
Originally Posted by Jcordell View Post
There comes a time in one's life when it just isn't important to buy the next year's model. Unless I have no choice I'm sticking with my G19-gen 4. I can start collecting my full pension on July 1, 2024. I don't see the need for the next variation with only 7 years left. Do I really have to change models....again?
Ultimately, they're both just [insert preferred caliber] pistols and a Gen 5 probably isn't going to be any better or worse than a 3 or 4.

I'm personally too obsessed with the P320 right now to be concerned with another Glock.
__________________
"Everything is impossible until somebody does it - Batman

RIP Kevin Conroy, the one true Batman
Reply With Quote
  #9  
Old 10-11-2017, 02:57 PM
Jcordell Jcordell is offline
Formerly "Checkman"
IMFDB Admin
 
Join Date: Nov 2008
Location: Idaho
Posts: 1,034
Default

Quote:
Originally Posted by Spartan198 View Post
Ultimately, they're both just [insert preferred caliber] pistols and a Gen 5 probably isn't going to be any better or worse than a 3 or 4.

I'm personally too obsessed with the P320 right now to be concerned with another Glock.
I get it. The G19 is one of my work-tools. My interest is revolvers. Don't care about the little tweaks that Glock is doing. Hopefully my agency will just leave my gen-4 with me. When the New York Times ran an in-depth article on the old NYPD officers who were still carrying revolvers (December 2004) I thought the old-timers were odd. Well guess what? Thirteen years later I'm older and I get it. I'll stick with what I've been carrying for many years now. Thanks.
Reply With Quote
  #10  
Old 10-12-2017, 04:58 AM
Excalibur's Avatar
Excalibur Excalibur is offline
IMFDB Admin
 
Join Date: Nov 2008
Location: USA
Posts: 3,842
Send a message via AIM to Excalibur Send a message via MSN to Excalibur Send a message via Yahoo to Excalibur
Default

Since I carry a Glock 19, a "newer" model would interest me, but the Gen 5 is a real bore now that I look deeper into it. I don't like the cut in the front bottom of the grip because I don't strip a stuck mag from there. I pinch the sides of the base plate and pull down. The flared magwell kinda makes it harder to seat flush mags if you don't send it home hard enough.
__________________

"There's a fine line between not listening and not caring...I like to think I walk that line everyday of my life."

Blessed be the LORD, my rock, Who trains my hands for war, And my fingers for battle
Psalm 144:1

“It is always wrong to use force, unless it is more wrong not to.”
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:09 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.