imfdb.org

imfdb.org (http://forum.imfdb.org/index.php)
-   Just Guns (http://forum.imfdb.org/forumdisplay.php?f=4)
-   -   Gun purchases thread. (http://forum.imfdb.org/showthread.php?t=1842)

S&Wshooter 09-13-2011 01:54 AM

Quote:

Originally Posted by predator20 (Post 32319)
I've already traded in one 1911 and another is going to get a .22 conversion (the Loaded). Too many 45s. Springfield Mil-Spec, Loaded, Les Baer, S&W 4505, SIG P220.

You are 18 now right? You could trade it in or sell it to the gunshop. Though you're likely to get raped on the deal.

The only gunshop in town has a display case full of 1911's nicer than mine, and they rarely buy used handguns. My uncle showed some interest in buying it, but he hasn't said anything about it to me since

predator20 09-13-2011 03:01 AM

Quote:

Originally Posted by S&Wshooter (Post 32323)
Whoops, I meant hammerbite. Actually, it is really more of a combination of hammerbite and the grip safety digging into my hand

Unless you don't like 1911's. I would upgrade the hammer and grip safety as K9870 said. While drop-in beavertails don't look all that great, it'll take care of your hammer bite. Shortening the spur hammer would be the quickest and cheapest method though.

Here's a good article on the HS 1911's. Not sure how old it is.

http://findarticles.com/p/articles/m.../ai_n16741478/

S&Wshooter 09-13-2011 03:06 AM

Quote:

Originally Posted by predator20 (Post 32328)
Unless you don't like 1911's. I would upgrade the hammer and grip safety as K9870 said. While drop-in beavertails don't look all that great, it'll take care of your hammer bite. Shortening the spur hammer would be the quickest and cheapest method though.

Here's a good article on the HS 1911's. Not sure how old it is.

http://findarticles.com/p/articles/m.../ai_n16741478/

I'd rather just sell it. I already have all the .45 I need at the moment

S&Wshooter 09-13-2011 03:14 AM

It'd be neat to go over to the Briley shop and have them trick it out a bit

funkychinaman 09-13-2011 05:40 AM

Accompanied a buddy to the gun shop the other day. I saw that Stoeger Cougers were slightly north of $400 new. Anyone have any experience with them?

Yournamehere 09-13-2011 09:51 AM

Quote:

Originally Posted by S&Wshooter (Post 32321)
The only reason I hate on it is because it slide-bites the shit out of me due to my large hands, I have trouble using the sights correctly because my vision isn't too great, and it won't chamber the HD ammo I use. Otherwise, it runs fine, has only about 100 rounds in it, feels solid, and only has one tiny scratch on the frame

You have berated the everloving hell out of that gun for being unreliable and you've only fired 100 rounds out of it, and it has only hand problems with hollowpoints? Words can't express how silly that is...

Oh and also, a Stoeger Cougar should be under 400 bucks new, I see them for less all the time. I have no experience with them other than handling them at gun stores, though I'm sure they handle fine. I'd save up a little more for something better though.

S&Wshooter 09-13-2011 03:25 PM

Quote:

Originally Posted by Yournamehere (Post 32332)
You have berated the everloving hell out of that gun for being unreliable and you've only fired 100 rounds out of it, and it has only hand problems with hollowpoints? Words can't express how silly that is...

.

I haven't berated it for unreliability, I have berated it because it tears up my hand and won't feed the COR-BON hollowpoints I keep for HD. It feeds ball and Winchester hollowpoints fine.

S&Wshooter 09-13-2011 03:28 PM

Quote:

Originally Posted by funkychinaman (Post 32331)
Accompanied a buddy to the gun shop the other day. I saw that Stoeger Cougers were slightly north of $400 new. Anyone have any experience with them?

You could probably get something better than a Cougar for around that much on Gunbroker or at a gunshow

funkychinaman 09-13-2011 03:54 PM

Quote:

Originally Posted by S&Wshooter (Post 32334)
You could probably get something better than a Cougar for around that much on Gunbroker or at a gunshow

I also saw PX4s for around the same price, but in .40. I hope the 9mm is around the same or less. They both appear to be DA/SA with a decocker.

Can they use Beretta 92 mags?

k9870 09-13-2011 04:25 PM

My CZ was 504 OTD. thats a good buy.

The p64 is shipping now, can't wait, now wolff just needs to get me my springs, speaking of orders balde tech is taking forever!:mad:

funkychinaman 09-13-2011 04:43 PM

Quote:

Originally Posted by k9870 (Post 32338)
My CZ was 504 OTD. thats a good buy.

The p64 is shipping now, can't wait, now wolff just needs to get me my springs, speaking of orders balde tech is taking forever!:mad:

I'm curious to hear about the P64. I was looking into one last year. The horrendous DA pull and the lack of decent 9mm Mak defensive rounds sort of turned me off though.

Does anyone have any experience with the P-83?

k9870 09-13-2011 05:07 PM

Hornady makes a great defensive round, and wolff springs are supposed to help the trigger pull.

S&Wshooter 09-13-2011 08:26 PM

Quote:

Originally Posted by funkychinaman (Post 32335)
I also saw PX4s for around the same price, but in .40. I hope the 9mm is around the same or less. They both appear to be DA/SA with a decocker.

Can they use Beretta 92 mags?

I heard Cougars are pretty "meh" anyways

Examples of other guns in and around that price range
http://www.gunbroker.com/Auction/Vie...Item=251043173
http://www.gunbroker.com/Auction/Vie...Item=251060607
http://www.gunbroker.com/Auction/Vie...Item=250975579
http://www.gunbroker.com/Auction/Vie...Item=249662493
http://www.gunbroker.com/Auction/Vie...Item=250832543

Ignoring FFL fees and tax, I see similiar guns to these all the time at gunshows at similiar prices

funkychinaman 09-14-2011 04:00 PM

Quote:

Originally Posted by S&Wshooter (Post 32353)
I heard Cougars are pretty "meh" anyways

Examples of other guns in and around that price range
http://www.gunbroker.com/Auction/Vie...Item=251043173
http://www.gunbroker.com/Auction/Vie...Item=251060607
http://www.gunbroker.com/Auction/Vie...Item=250975579
http://www.gunbroker.com/Auction/Vie...Item=249662493
http://www.gunbroker.com/Auction/Vie...Item=250832543

Ignoring FFL fees and tax, I see similiar guns to these all the time at gunshows at similiar prices

I didn't think you could get a new SIG for that cheap.

It's my understanding Cougars are just compact M92s.

Yournamehere 09-14-2011 10:40 PM

>M92
>not just "92"

But seriously, the Cougar employs a different locking mechanism, but is still mechanically functional as the 92FS is, or at least it looks that way in terms of controls. Even so, with the right gunbroker auction, or even by stepping in the right local store, you could find something better at or around that price range.

As for the SP2022, it's sort of a budget gun by SIG. I'm sure they're nice, but it's still one of those "polymer guns made by a company who isn't known for making polymer guns but decided to make a polymer gun" guns. I feel one could do better with their money still, especially when a ton of P228s have been imported by PW Arms and are ending up on the market in crazy numbers as the pre-B CZs and the Hi-Powers from PW Arms before them, though you have to pick a gun that doesn't look like it's seen ridiculous use, and you have to tolerate the import mark they are forced to etch on the side of the gun (I can't get over them it ruins the aesthetic every time for me, but others might).

Rockwolf66 09-14-2011 10:59 PM

I'm thinking of selling my Remington 700p and getting an EEA witness compact as a carrygun.

Spades of Columbia 09-14-2011 11:25 PM

the stoeger cougar is the beretta cougar...they just moved the machinary to Turkey

funkychinaman 09-15-2011 12:25 AM

I'm looking for a compact pistol that I can CC AND use in my range's action pistol competitions. It has to be double-stack, 9mm, preferably DA/SA, and preferably around $450 or less.

CZs are too heavy, HPs are too big. I got a bit burned on my Walther P38, so I'd prefer new to used as well.

I have a Stoeger Condor, and it's been fine, so I have no problem with the company. And $409 was for the Inox.

k9870 09-15-2011 12:43 AM

CZ too heavy? Looked at a p01?

k9870 09-22-2011 04:23 PM

Got the p64, pics later, should post some pics of my blade tech rig also. Cameras dead and heading to work so ill get it done maybe tomorrow.

S&Wshooter 09-22-2011 09:33 PM

Quote:

Originally Posted by funkychinaman (Post 32393)
I'm looking for a compact pistol that I can CC AND use in my range's action pistol competitions. It has to be double-stack, 9mm, preferably DA/SA, and preferably around $450 or less.

CZs are too heavy, HPs are too big. I got a bit burned on my Walther P38, so I'd prefer new to used as well.

I have a Stoeger Condor, and it's been fine, so I have no problem with the company. And $409 was for the Inox.

How 'bout a 6906?

predator20 09-22-2011 10:02 PM

1 Attachment(s)
Traded my RIA 38 Super in for some 38 Super and 38 Special ammo (mostly 38 Super) Got a Springfield Mil-Spec 38 Super that's had some custom work done on the way.

S&Wshooter 09-22-2011 11:37 PM

Quote:

Originally Posted by predator20 (Post 32475)
Traded my RIA 38 Super in for some 38 Super and 38 Special ammo (mostly 38 Super) Got a Springfield Mil-Spec 38 Super that's had some custom work done on the way.

Disregard Filipino firearms; Acquire ammo for your kickass custom gun

predator20 09-23-2011 12:41 AM

Quote:

Originally Posted by S&Wshooter (Post 32477)
Disregard Filipino firearms; Acquire ammo for your kickass custom gun

Yup pretty much. The RIA isn't or wasn't a bad gun though.

k9870 09-23-2011 01:53 AM

http://i1235.photobucket.com/albums/...Badass/002.jpg

Heres the p64 in my hand.

Here it is with the holster, holster holds the gun and a spare mag, its kinda cool since its the original but not a very secure design, kinda floppy.

http://i1235.photobucket.com/albums/...Badass/002.jpg

Mag release takes some getting used to, sights aren't great but more than enough for this type of gun, DA pull sucks ass but sa is a target trigger, no joke, its great. Can't wait to shoot it, i have a wolff spring for the trigger.

My hand is a bit big and when gripping thumbs tend to touch slide, dont know if this will cause a problem. slide only locks on an empty mag and will not release forward unless mag is dropped or a loaded one is put in, no slide stop means racking slide on reload is a must.

Ill give more impressions when i shoot it.

k9870 09-25-2011 02:46 PM

Sorry noticed i put same pic twice here you go:

http://s1235.photobucket.com/albums/...urrent=001.jpg


I want to buy a shoulder thing that goes up.

k9870 09-27-2011 02:09 AM

bought some psitolsmith punches so i can change mainspring, the da pull on the p64 is unusable and i dont like condition 3 so ill change the mainspring once its here. I weighed the trigger it is 5 pounds but honestly feels lighter as afterthe takeup there is very little travel before the break. Im also getting some sandpaper to polish up the feed ramp.

k9870 10-28-2011 12:19 AM

Ordered a romanian tokarev today.

Excalibur 10-28-2011 04:40 AM

Looking up a 1911 to own one day.

My 1911 needs the following things on it

Front cocking serrations
A rail for a light/laser
Ring hammer, better beaver tail grip
Night sights - can get some after buying it.
Need to research some good mags

Though I am liking the Springfield Parkerized with all of the following except the rail

k9870 10-28-2011 02:27 PM

Quote:

Originally Posted by Excalibur (Post 32899)
Looking up a 1911 to own one day.

My 1911 needs the following things on it

Front cocking serrations
A rail for a light/laser
Ring hammer, better beaver tail grip
Night sights - can get some after buying it.
Need to research some good mags

Though I am liking the Springfield Parkerized with all of the following except the rail

You want front serrations? Im mad there is not enough 1911s without them, there ugly.

predator20 10-28-2011 03:58 PM

Quote:

Originally Posted by Excalibur (Post 32899)
Looking up a 1911 to own one day.

My 1911 needs the following things on it

Front cocking serrations
A rail for a light/laser
Ring hammer, better beaver tail grip
Night sights - can get some after buying it.
Need to research some good mags

Though I am liking the Springfield Parkerized with all of the following except the rail

Springfield TRP Operator Light Rail would be the one I'd go with, has everything that you want. (The rear adjustable sight has a tritium insert.) Colt also makes one, but you won't get the strap checkering or night sights. There's also Mimber.... I sorry Kimber too.

As far as magazines go. While everyone loves Wilson's. They are pricey. Mec-Gar or ACT mags work just as well and are about 10 bucks cheaper.

http://www.imfdb.org/w/images/e/e0/S...Armory_TRP.jpg

k9870 10-28-2011 09:54 PM

Quote:

Originally Posted by predator20 (Post 32904)
Springfield TRP Operator Light Rail would be the one I'd go with, has everything that you want. (The rear adjustable sight has a tritium insert.) Colt also makes one, but you won't get the strap checkering or night sights. There's also Mimber.... I sorry Kimber too.

As far as magazines go. While everyone loves Wilson's. They are pricey. Mec-Gar or ACT mags work just as well and are about 10 bucks cheaper.

http://www.imfdb.org/w/images/e/e0/S...Armory_TRP.jpg

TRPs rock, the checkering is a bit "manly" but get the job done nice. g10 grips are sweet 2, and theres a lifetime warranty, field strips a little harder withit though it needs an allen wrench.

predator20 10-28-2011 11:43 PM

Quote:

Originally Posted by k9870 (Post 32908)
TRPs rock, the checkering is a bit "manly" but get the job done nice. g10 grips are sweet 2, and theres a lifetime warranty, field strips a little harder withit though it needs an allen wrench.

Yes the do.

They have the non-TRP Operator and it won't have the checkering. You also get fixed sights.

Maybe it's just with me. My hands get eaten up more by the rear strap of the gun than the front.

k9870 11-02-2011 04:06 PM

http://i1235.photobucket.com/albums/...Badass/004.jpg

funkychinaman 11-03-2011 12:56 AM

Quote:

Originally Posted by k9870 (Post 32955)

That has a manual safety fitted, right?

Excalibur 11-03-2011 01:26 AM

Quote:

Originally Posted by k9870 (Post 32908)
TRPs rock, the checkering is a bit "manly" but get the job done nice. g10 grips are sweet 2, and theres a lifetime warranty, field strips a little harder withit though it needs an allen wrench.

Did I mention I want the gun to NOT cost an arm and a leg to get? The TRP's like a thousand dollars and most likely more.

predator20 11-03-2011 01:32 AM

Quote:

Originally Posted by Excalibur (Post 32969)
Did I mention I want the gun to NOT cost an arm and a leg to get? The TRP's like a thousand dollars and most likely more.

You gotta dream BIG!

RIA has a full rail 1911 out right now called the 2011 I think. If you're going with budget.

Not too many railed 1911s out there are modestly priced.

k9870 11-03-2011 03:20 AM

Quote:

Originally Posted by funkychinaman (Post 32964)
That has a manual safety fitted, right?

They are actually factory, the yugos have a safety fitted. It only blocks the trigger though, not the hammer, so no condition 1, i have safety off. And if i carried it would be condition 3.

Sights are good for a mil gun of the time, better than a gi 1911 as they are larger and easier to see. Trigger breaks just over 5 pounds.

Excalibur 11-05-2011 11:06 PM

I ordered this

http://www.budsgunshop.com/catalog/p...ducts_id/75563

k9870 11-06-2011 03:19 AM

Quote:

Originally Posted by Excalibur (Post 33032)

ati is supposed to make a solid product, enjoy:)


All times are GMT. The time now is 11:24 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.