imfdb.org

imfdb.org (http://forum.imfdb.org/index.php)
-   Just Guns (http://forum.imfdb.org/forumdisplay.php?f=4)
-   -   Gun purchases thread. (http://forum.imfdb.org/showthread.php?t=1842)

MT2008 05-06-2022 12:17 AM

So, not that anyone asked for it, but here we go: Real Steyr SPP, and rubber Steyr SPP from the movie "Stratton" (which I purchased from Propstore). Can you tell which is which?

http://www.imfdb.org/images/d/d7/MT2008-SteyrSPPs-1.jpg
http://www.imfdb.org/images/4/41/MT2008-SteyrSPPs-2.jpg

Spartan198 05-06-2022 02:01 AM

Quote:

Originally Posted by MT2008 (Post 45441)
So, not that anyone asked for it, but here we go: Real Steyr SPP, and rubber Steyr SPP from the movie "Stratton" (which I purchased from Propstore). Can you tell which is which?

http://www.imfdb.org/wiki/File:MT2008-SteyrSPPs-1.jpg
http://www.imfdb.org/wiki/File:MT2008-SteyrSPPs-2.jpg

(For some reason, I can't get my images to show up using the Insert Image function anymore.)

The bottom one is rubber. It's pretty easy to notice the molded-in controls.

MT2008 05-06-2022 03:41 AM

Quote:

Originally Posted by Spartan198 (Post 45442)
The bottom one is rubber. It's pretty easy to notice the molded-in controls.

Congrats. You win everything. Except the guns; those I'm keeping forever. :D

If you look closely, you can also see some signs of the damage from on-set use on the rubber SPP, namely the chip on the charging handle and the hole in the trigger guard. When I got it, the entire gun was also covered in dirt residue, probably because it was used in the opening scene at the Iranian facility (even though I watched the movie and couldn't find where it appears).

Rockwolf66 06-25-2022 04:01 PM

I have just bought a Stripped Spikes Tactical AR-9 glock magazine lower. I am building it as a pistol With CCMG internals, Magpul MOE grip, ASAP plate, and a SB Brace.

The upper parts I am having difficulty finding locally as I've hit every gunstore within 30 miles of my house and have found Nothing.

MT2008 08-09-2022 11:35 PM

I'm hoping to do another retro AR-15 movie clone build. This time, it will be a clone of the XM177s from "The Rock" and other 1990s action movies. The base will be an Olympic Arms CAR-AR (K3B) upper, which is (I'm pretty sure) what was used in the movie, too.

Jcordell 08-23-2022 04:28 AM

All these high tech cutting edge guns and then there is me and my love of antiques. I'm currently bidding on a pre-war (World War 1) Smith & Wesson M&P Target model. The Target M&P revolvers (Pre K-38/Model 14 Target Masterpiece) are not very numerous so I'm willing to spend a little extra. I'll know in two days when the auction closes.

S&Wshooter 08-26-2022 06:32 PM

Quote:

Originally Posted by Jcordell (Post 45480)
All these high tech cutting edge guns and then there is me and my love of antiques. I'm currently bidding on a pre-war (World War 1) Smith & Wesson M&P Target model. The Target M&P revolvers (Pre K-38/Model 14 Target Masterpiece) are not very numerous so I'm willing to spend a little extra. I'll know in two days when the auction closes.

I demand pictures if you win!

I got myself a S&W Model 60, .357 Magnum, with a 3" bbl as a birthday gift to myself, and when I went to shoot it they had a very good condition Kahr PM9 with box and mags (for $250 less than the cheapest crappiest one I could find on gunbroker) so I did me another impulse purchase. Somehow the Kahr is as easy to shoot as my S&W 5906; I am very impressed, but less impressed that all the aftermarket grip options for my new Model 60 are just awful compared to the ugly OEM grips. I really wish the Hogue monogrip for J-frames was the same as the one for the Taurus 85/605/856 (like the same layout, shape, etc), because my 605 is very pleasant to shoot with magnums, and doesn't jump around or rotate in my grip almost at all

Jcordell 08-30-2022 07:05 AM

Quote:

Originally Posted by S&Wshooter (Post 45483)
I demand pictures if you win!

I got myself a S&W Model 60, .357 Magnum, with a 3" bbl as a birthday gift to myself, and when I went to shoot it they had a very good condition Kahr PM9 with box and mags (for $250 less than the cheapest crappiest one I could find on gunbroker) so I did me another impulse purchase. Somehow the Kahr is as easy to shoot as my S&W 5906; I am very impressed, but less impressed that all the aftermarket grip options for my new Model 60 are just awful compared to the ugly OEM grips. I really wish the Hogue monogrip for J-frames was the same as the one for the Taurus 85/605/856 (like the same layout, shape, etc), because my 605 is very pleasant to shoot with magnums, and doesn't jump around or rotate in my grip almost at all

I didn't win it. :( However, I did win the bid on a brand-new Ruger SP101 still in the box with all documents. This one is chambered for 38 Special +P. Not a big deal for me. I own many 38 Special revolvers and I have a fair amount of ammo. The win was $390 and after tax and fees I paid $477. A search on the serial number at Ruger.com shows that it was shipped last year. Considering that in any of the local gun stores I would pay a minimum of $650 (taxes not included) I can't complain. I've been wanting an SP-101 and they aren't easy to find anymore. At least not here in my corner of America. I've looked into ordering one and I was told it would be several weeks (an optimistic estimate) with no definite date of delivery. Evidently Ruger is back ordered several months. This is alright. I replaced the black plastic grip panels with the old wooden ones that came with my GP-100 3". I got the new panels from Ruger. Anyway, it isn't a pre-war M&P Target, but it's something that I have been wanting. Notice how the cylinder is slightly tapered. Looks like Ruger is using the cylinders from the Wiley Clapp SP-101 model. I like the Ruger grips and they'll stay on my revolvers. I actually owned an SP for a few months back in 2005, but I traded it off for something and as the years have gone by, I've regretted doing that. Yes, it's a bit of a chunk, but it's strong and reliable. I'll hold onto this one.

https://i.postimg.cc/gLkNXvkL/IMG-20220827-113157.jpg

MT2008 10-01-2022 01:14 PM

Last gun purchase before I move to the (sadly) unfree state of Maryland: I am now the proud owner of a nickel-plated West German-made SIG-Sauer P226, which has been on my collection list for many years now. It's also by far the most expensive handgun I've ever purchased, even more than my Steyr SPP (which I also bought this year), in part because I was in a bidding war with another buyer on GunBroker.

S&Wshooter 10-19-2022 01:52 AM

Quote:

Originally Posted by Jcordell (Post 45484)
I didn't win it. :( However, I did win the bid on a brand-new Ruger SP101 still in the box with all documents. This one is chambered for 38 Special +P. Not a big deal for me. I own many 38 Special revolvers and I have a fair amount of ammo. The win was $390 and after tax and fees I paid $477. A search on the serial number at Ruger.com shows that it was shipped last year. Considering that in any of the local gun stores I would pay a minimum of $650 (taxes not included) I can't complain. I've been wanting an SP-101 and they aren't easy to find anymore. At least not here in my corner of America. I've looked into ordering one and I was told it would be several weeks (an optimistic estimate) with no definite date of delivery. Evidently Ruger is back ordered several months. This is alright. I replaced the black plastic grip panels with the old wooden ones that came with my GP-100 3". I got the new panels from Ruger. Anyway, it isn't a pre-war M&P Target, but it's something that I have been wanting. Notice how the cylinder is slightly tapered. Looks like Ruger is using the cylinders from the Wiley Clapp SP-101 model. I like the Ruger grips and they'll stay on my revolvers. I actually owned an SP for a few months back in 2005, but I traded it off for something and as the years have gone by, I've regretted doing that. Yes, it's a bit of a chunk, but it's strong and reliable. I'll hold onto this one.

https://i.postimg.cc/gLkNXvkL/IMG-20220827-113157.jpg

I would not mind a GP-100 (used, Ruger can pound sand after breaking my Redhawk), but they seem to never go cheap anymore! Same with the SP-101s, either used to be easy to find in great shape (along with Security Six series guns) for under $350 at basically any pawn shop here, sadly that ended before I could buy handguns

S&Wshooter 10-19-2022 01:55 AM

Quote:

Originally Posted by MT2008 (Post 45488)
Last gun purchase before I move to the (sadly) unfree state of Maryland: I am now the proud owner of a nickel-plated West German-made SIG-Sauer P226, which has been on my collection list for many years now. It's also by far the most expensive handgun I've ever purchased, even more than my Steyr SPP (which I also bought this year), in part because I was in a bidding war with another buyer on GunBroker.

my little brother is about to be stuck in Maryland for a whole year to train as a merchant sailor and is slightly apprehensive about being gatless for a whole rotation around the sun. I am tempted to snag a LE trade-in .40 P226 and dropping a .357 barrel in it to have some Texas DPS Trooper magic hanging around; they would only switch from the venerable S&W Model 19 if it were to be replaced with something that'd zip through auto glass, and ended up with SIGs

MT2008 12-17-2022 12:49 AM

After all these years, I finally bought my first-ever 1911: A Para Ordnance P14-45. (And yes, in keeping with my collection theme: An older one made in the 1990s.)

S&Wshooter 01-13-2023 04:53 PM

I got a late 90's Mini-14 last month; I know it is objectively worse than even a budget AR in most ways, but I've always thought they were interesting and would be something I might be more motivated to actually go shoot than my Stag. Other than that, I got mags for it and a pair of OEM checkered walnut grips for my Beretta 84F, along with a pair of Shaw Concept ReUp bandoliers

Jcordell 03-16-2023 01:35 AM

Picked up a Model 59 at auction today. When it was all said and done, I paid $406.80. Serial number gives it a DOB circa 1977/78. Mechanically it's in good shape, no cracked frame and the bore is clean and shiny. No box so it's a shooter, but even then, it's in good shape. I'm not worried about the issues the Model 59 had back in the day since I bought it for historical interest rather than CCW or home-defense. I've been wanting a Model 52 ever since I picked up my Model 5944 a few years ago. I've learned that the first-generation Model 59 examples aren't as common as they used to be. Can't imagine why. It's only been 40 years since the Model 59 went out of production. Anyway, here it is with the Model 5944. First and third generation. Too many episodes of ''Starskey & Hutch" when I was a kid in the Seventies I suppose. :D

https://i.postimg.cc/kDnRH22S/1000000098.jpg

https://i.postimg.cc/SYNXYvBd/1000000100.jpg

Rockwolf66 08-14-2023 01:56 AM

As I am waiting for Oregon measure 114 to be declared Unconstitutional and thrown out. I have been buying what I can even though sometimes the state background check backlog is stupidly long.

When it passed I bought a Century arms VSKA pistol. Otherwise it's an American built Draco. So far i have put a proper flash hider on it, a Midwest industry fore-end, a magpul AK pistol grip and a crimson trace flashlight.

More recently I have gotten a PTR 32 KFR. It's so new that I have yet to shoot it. I am planning on tricking it out like my 32P. Midwest industry fore-end, Tactical light, Magpul trigger housing and safety switch. I'm not sure if I should go with the Choate folder I have or find something better. As for Optic since this is a carbine I will be going with a LPVO scope.

MT2008 08-15-2023 01:17 AM

My obsession with cloning firearms that nobody except me noticed continues. Since I now own both regular blued and electroless nickel German-made SIG-Sauer P226s, I decided to clone the P226s from the movies "Bad Boys 2" and "2 Fast 2 Furious" by swapping parts between the two guns:

https://www.imfdb.org/images/0/01/MT...BadBoys2-1.jpg
https://www.imfdb.org/images/2/20/MT...BadBoys2-2.jpg

I'm still pretty sure to this day that Independent Studio Services made both guns for both movies (which were both filmed at the same time in Key Biscayne) by doing the same thing I did with at least four of their guns. Not that anyone cares except me...

Also: I'm not sure what MPM2008 had trouble doing the same thing when he made the pics that we have on the IMFDB pages for those movies. Maybe because his blued P226 has the K-Kote finish which threw off the tolerances on the parts?

MT2008 08-15-2023 01:22 AM

Quote:

Originally Posted by Rockwolf66 (Post 45542)
As I am waiting for Oregon measure 114 to be declared Unconstitutional and thrown out. I have been buying what I can even though sometimes the state background check backlog is stupidly long.

When it passed I bought a Century arms VSKA pistol. Otherwise it's an American built Draco. So far i have put a proper flash hider on it, a Midwest industry fore-end, a magpul AK pistol grip and a crimson trace flashlight.

More recently I have gotten a PTR 32 KFR. It's so new that I have yet to shoot it. I am planning on tricking it out like my 32P. Midwest industry fore-end, Tactical light, Magpul trigger housing and safety switch. I'm not sure if I should go with the Choate folder I have or find something better. As for Optic since this is a carbine I will be going with a LPVO scope.

I'm sympathetic; I had to move to Maryland this year, which I was extremely unhappy about, as MD is not nearly as gun-friendly as Virginia (where I had lived for 10 years before). Before I left VA, I purchased twice as many handguns as I had owned before. I also had to do barrel swaps on all my AR-15s (due to MD's annoying requirement that only "heavy"-barreled ARs are legal if purchased after 2013).

I'll grant you, when Measure 114 passed in Oregon, I was like, "Damn, I'm at least glad I don't live there..."

Jcordell 08-15-2023 02:35 AM

Quote:

Originally Posted by MT2008 (Post 45544)
I'll grant you, when Measure 114 passed in Oregon, I was like, "Damn, I'm at least glad I don't live there..."

Living just thirty miles from the Oregon state line I have had similar thoughts.

Jcordell 09-27-2023 11:55 PM

Okay I've waited over three years since the new Python was introduced and now, they're finally available in decent number here in Idaho- to include the 3"-barrel model. I've sold a few of my guns and I have the money. I've been eyeballing the Python since the Seventies and now I'm finally getting one. It might not be exactly like the classic Python, but it's enough.

MT2008 10-04-2023 03:52 PM

Quote:

Originally Posted by Jcordell (Post 45546)
Okay I've waited over three years since the new Python was introduced and now, they're finally available in decent number here in Idaho- to include the 3"-barrel model. I've sold a few of my guns and I have the money. I've been eyeballing the Python since the Seventies and now I'm finally getting one. It might not be exactly like the classic Python, but it's enough.

Get it. I really want a Python myself some day. Brownell's seems to have then in inventory now.

That being said, I'm annoyed that Colt is no longer producing the blued version, as I think I like that version the best. I recently re-watched the movie "The Last Marshal" (which now has an IMFDB page thanks to me), and Scott Glenn uses a blued 6" Python with ivory grips as his main sidearm - I think that's what I want my ideal Python to look like.

Jcordell 10-05-2023 02:17 AM

Picked it up this afternoon. I've wanted to own a Python since I was a kid in the Seventies. I picked it up at my LGS a few hours ago. It's a very nicely put together revolver I have to say. I paid $1,446 dollars for it. My local dealer sold it to me for almost wholesale. This is the most money I've ever paid for a handgun, but I finally have a Python. I'll be taking it to the range during my next weekend.

https://i.postimg.cc/9wmg6X20/IMG-20231004-190019.jpg

https://i.postimg.cc/DS8HfzXb/IMG-20231004-190036.jpg

https://i.postimg.cc/VdBh6nj7/IMG-20231007-165654.jpg


All times are GMT. The time now is 12:02 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.