Guns you want to see made.

[k9870]

Using existing technology, no phased 40wt plasma guns.

I'll go first.

Take a standard stock (no pistol grip) hogue coated for comfort, And it's a semiauto 7.62x25 tokarev, with Stainless barrel and action to make it usable with commie surplus crap, peep sights, and ability to take ppsh drums.
The ultimate plinker.

Your turn.

[Gunmaster45]

I don't know how but I'm going to try and build this with photoshop.

[k9870]

I look forward to seeing it. Like a modified, hogue ppsh with peep sights.

[Gunmaster45]

Aside from the barrel not being stainless, here's what I built (I know it is awful):

http://i42.tinypic.com/289j0v4.jpg

I don't think it is at all what you expected XD

[Gunmaster45]

I took what you said about it being a Tokarev wrong, I thought you actually wanted a TT-33. I should have built the gun off the PPSh, that would have been a LOT easier. This edit to a LONG time btw.

[Cutaway]

Rotary barrel GPMG:
http://img8.imageshack.us/img8/818/minigunj.jpg

http://img507.imageshack.us/img507/1344/bomsequence1ih.jpg

[k9870]

It would be like a ppsh/10/22

Id want the large cap drum, and 762x25 caliber, stainless, and be modular so user could change parts at will. Hogue may be ugly but confortable to shoot, and stainless you can shoot dime-a-round commie milsurp. Ability to accept different mags (like a sub-2000) would be a plus.

[MT2008]

Mine are a little more modest:

(1.) I'd like to see somebody make a pistol that's chambered for the 5.7x28mm cartridge that's a bit smaller (in barrel length/grip height) than the FN Five-Seven.
(2.) An assault rifle that can be modified as either a bullpup or standard layout by having part of the receiver and magazine well movable to either the front or rear. (I think somebody already proposed this)

[MT2008]

Aside from the barrel not being stainless, here's what I built (I know it is awful):

http://i42.tinypic.com/289j0v4.jpg

I don't think it is at all what you expected XD

Tokarev carbine? Would it be select-fire?

[k9870]

Is that an anschutz sporter stock as a forend and a 93R front grip in front of the drum?

[Gunmaster45]

I doubt anyone could even hold this monster. I used a C-96 Carbine forend and extended it more with the clone brush. I also wrapped a Hogue stock around the back end and reshaped it to work better. I put the 93R forgrip in the front so there's something to grip the gun by with your fingers, maybe it could function as a grip safety. I'd say it is selective fire, or else it'd take a long time to unload the drum mag.

I made the extractor stainless steel to increase reliability. And I reused the star on the grip and raised it higher. It took a long time but I'm not proud of it...

[k9870]

I wish I had photoshop, time to try this on paint lol.

[k9870]

http://www.imfdb.org/forum/attachment.php?attachmentid=13&d=1239145076

Here it is

[Gunmaster45]

You should consider some slight modifications. Move the magazine further back. The PPSh's magazine is forward more because it is open bolt. This gun looks closed bolt. Plus if you want a good plinker, open bolt is going to make accuracy as joke.

In my opinion, just buy a Ruger 10/22, buy a 50 round magazine or drum, add a peep sight and you've got a cheap plinker, very similair to this gun. Except it doesn't fire crap ammo, .22s are cheaper than dirt (I never got that expression, dirt's pretty expensive anymore)

[k9870]

The idea is to not be a .22, i plink with my savage a lot but I often wish I could plink with a loud, hard hitting round, and the hot tokarev round is moving, look at the velocity on it! It would be fun to use this when .22s aren't cutting it.

[Gunmaster45]

I guess I understand but why make more noise just so you can hit a target harder? Are those hostile metal plates not being penetrated or something?

Anyway, maybe a CZ-52 with a shoulder stock and 16" barrel would do it.
I have those for my 1911, but ammo's too expensive to plink with.

[Krel]

I would like to see the Randall line of left-handed Government model pistol, and the variants revived.

David.

[k9870]

I'm guesisng other people have ideas to photoshop out

[Cutaway]

"Minigun" Upper Reciever for AR15/M16s derivatives using Webley-Fosbery action to rotate barrels:

http://img231.imageshack.us/img231/3289/arminigungr4.jpg

[Gunmaster45]

The ACOG is too high to aim with, you wouldn't be aiming correctly everytime because you don't have a stock to rest on.

[k9870]

I never complain about weight on a rifle, Id happily carry an m14, but tthat must handle like a couple cinder blocks glued together. Must be well heavvvvy, which the AR-15s only advantage was its lightweight....

[k9870]

Someone on another forum said he wants a 7.62x39 revovler, would that be insane or what?

[Alcatrazz]

I'd like to see an Armalite AR-7 without a stock, a cut down barrel, and a tube magazine like on the Winchester lever action rifles. Oh, and a M16 with a Calico magazine.

[Cutaway]

A better quality one of these:

http://img528.imageshack.us/img528/4269/pumpactionrevolvershotgal6.jpg

[McSwan]

Just bringing this thread to life using this websight: http://pimpmygun.doctornoob.com/index.php

Here is a cool gun idea.
http://thumb11.webshots.net/t/71/171/0/2/71/2175002710104211311fqzbvs_th.jpg (http://entertainment.webshots.com/photo/2175002710104211311fqzbvs)

[PersonOfInterest]

Oh, and a M16 with a Calico magazine.

I'd heard somewhere that the Chinese made one of these with a 90 round capacity.

[PersonOfInterest]

Someone on another forum said he wants a 7.62x39 revovler, would that be insane or what?

http://en.wikipedia.org/wiki/Pfeifer_Zeliska_.600_Nitro_Express_revolver

http://pds10.egloos.com/pds/200902/01/89/b0074389_49846d1455968.jpg

http://www.funis2cool.com/wp-content/uploads/2009/05/pfeifer-zeliska-600-nitro-express-revolver-01.jpg

http://www.funis2cool.com/wp-content/uploads/2009/05/pfeifer-zeliska-600-nitro-express-revolver-05.jpg

[Swordfish941]

http://pds10.egloos.com/pds/200902/01/89/b0074389_49846d1455968.jpg

[img]http://www.funis2cool.com/wp-content/uploads/2009/05

Dirty Harry's .44 Magnum; Eat you heart out.

[Spartan198]

I'd like to see a civilian version of the Colt SCAR Light put into production.

http://www.gunzone.com/index_ColtLE1020.jpg
http://www.defensereview.com/stories/ndia/Arms%20at%20NDIA%20Small%20Arms%20Symposium_Colt%2 0LMG-SAW_M203.jpg

[S&Wshooter]

S&W Model 3 in .38 special/ .357 magnum that doesn't cost greater than or equal to used car

[S&Wshooter]

Also, a semi automatic MP5

[Nyles]

I don't think the S&W No.3 frame will accomodate a round as long as the .357. And the old barrel latch definately wouldn't stand up to the pressure, they're not super strong guns.

[PersonOfInterest]

also, a semi automatic mp5

hk94? Mp10?

[Excalibur]

S&W Model 3 in .38 special/ .357 magnum that doesn't cost greater than or equal to used car

Seriously? A .357 Magnum on a break action revolver? The .38 sure.

[S&Wshooter]

hk94? Mp10?

No, a real MP5, but semi instead of full/burst

[S&Wshooter]

I don't think the S&W No.3 frame will accomodate a round as long as the .357. And the old barrel latch definately wouldn't stand up to the pressure, they're not super strong guns.

Really? Damn.

[Nyles]

Well, as you all know new guns don't really excite me much, but I was thinking about some guns that were almcould have been made I wish they had.

Colt 1911 in .41 ACP - JMB was designing a .41 caliber version of the 1902 Auto, but the round was too much for the design, and by the time they figured out the solution the US Army had decided they wanted a .45 so the whole project was abandoned. If they'd kept doing with it and came out with a .41 ACP loaded somewhere near .38 Super levels, that could have been a pretty neat gun.

Colt 1911 in 7.63mm Mauser - Preferably with a tangent sight and attachable stock - basically similar to a Star Model A Pistol Carbine without the extended barrel. Might have sold well in Europe and Asia.

Steyr 1912 in 7.63mm Mauser - Likely have to beef up the design a little, but it sure would be a cool gun. And the 1912 was a good design that might have sold better if it chambered a more common round.

[S&Wshooter]

Mass production of the H&K P7M7

[Nyles]

Yeah, the length of the cartridge in a top-break gun is limited by the arc it has to travel to open - that's why the Schofield couldn't chamber .45 Colt rounds (and the reproductions had to be redesigned so it could). Same reason that the Brits went to .38 S&W instead of .38 Special when they decided they wanted a .38.

And espescially the barrel-mounted latch on the No.3 was quite weak - if you ever examine when you notice there's not actually all that much holding them together. The frame mounted latch on a Schofield (which is very similar to a Webley stirrup lock) is stronger, but even a Webley can't stand up to .45 ACP pressures, let alone .357 Mag.

[S&Wshooter]

Yeah, the length of the cartridge in a top-break gun is limited by the arc it has to travel to open - that's why the Schofield couldn't chamber .45 Colt rounds (and the reproductions had to be redesigned so it could). Same reason that the Brits went to .38 S&W instead of .38 Special when they decided they wanted a .38.

And espescially the barrel-mounted latch on the No.3 was quite weak - if you ever examine when you notice there's not actually all that much holding them together. The frame mounted latch on a Schofield (which is very similar to a Webley stirrup lock) is stronger, but even a Webley can't stand up to .45 ACP pressures, let alone .357 Mag.

Makes sense. I just want a Model 3 chambered in a relatively easy to find cartridge

[Spartan198]

No, a real MP5, but semi instead of full/burst
Meet the MP5SF.

http://www.heckler-koch.de/media/Products/Submachine_guns/mp5_sf.jpg
http://www.heckler-koch.de/HKWebText/detailProd/1926/126/4/20

[S&Wshooter]

Meet the MP5SF.

http://www.heckler-koch.de/media/Products/Submachine_guns/mp5_sf.jpg
http://www.heckler-koch.de/HKWebText/detailProd/1926/126/4/20

Is this currently available in America,in an un-neutered state?

[S&Wshooter]

Modern production of the Girandoni air rifle, except not extremely delicate

http://en.wikipedia.org/wiki/Girandoni_Air_Rifle

The thing shot .51 caliber BB's with the muzzle velocity of a .45!

[Yournamehere]

They don't sell MP5SFs here, at least not that I've seen. They are sold to and usually seen in the hands of various Europen Law Enforcement Agencies who want the MP5 system with a semi-auto only firemode. It seems a bit strange, but some LE guys over there don't see the need for full auto weapons, and if you think about it, full auto is mostly for suppression, and I can't see many scenarios where suppressive fire could be called upon in LE duty, aside from North Hollywood type gun battles, but those are few and far between.

Oddly enough they will do all kinds of firemodes on the MP5s. I saw a guy selling some MP5s for his LE agency here in America and they had semi-auto and 2 round burst firemodes, no 3 round or auto. Interesting stuff.

[k9870]

wow, colt should know to update the grip and stock if their making an expensive new rifle.

[PersonOfInterest]

Mass production of the H&K P7M7

Why? This was the worst gun I've ever shot. The grip safety is insanely stiff and throws off accuracy horribly.

[S&Wshooter]

Why? This was the worst gun I've ever shot. The grip safety is insanely stiff and throws off accuracy horribly.

It would be nice for H&K to make a gun that was actually worth the money you would spend on it

[Krel]

Why? This was the worst gun I've ever shot. The grip safety is insanely stiff and throws off accuracy horribly.

It's not a safety, it is the cocking mechanism. My brother-in-law has one, and I've fired it and love it. It bucks a bit because of the gas piston, but that allowed the pistol to use any type of ammo without changing the springs. I find it to be very accurate, and I'd own one if I could afford it. The only complaint I have is that the cocking mechanism is a tad noisy. It is a good pistol for a south paw, which we both are.

David.

[Spartan198]

wow, colt should know to update the grip and stock if their making an expensive new rifle.
Are you referring to the Colt SCAR Light I posted? If so, then why fix what isn't broken?

[Swordfish941]

A triple barreled shotgun.

[Nyles]

http://2.bp.blogspot.com/_z7xCVpP6qYI/SlpLc_hqgXI/AAAAAAAAABk/Pez4ofC6gDM/s1600/sportinglodge%2B378a.jpg

[S&Wshooter]

A triple barreled shotgun.

You can get a Drillings rifle made that way

[Mad Man 2.0]

Triple barrel break open Duckfoot pistol chambered for .357 Magnum

LeMat chambered for .38 special and .410 gauge

select fire CX4 Storm

Five-seveN with 2rd burst

.357 Magnum Sub machine gun

.50 AE Sub machine gun (Demonic Eagle)

Pump-action AK-47

Pump-action AK-47 Cut down into a pistol

Semi-auto Lee-Enfield

Vuvuzela with pistol grip and bayonet

[Gunmaster45]

Triple barrel break open Duckfoot pistol chambered for .357 Magnum

LeMat chambered for .38 special and .410 gauge

select fire CX4 Storm

Five-seveN with 2rd burst

.357 Magnum Sub machine gun

.50 AE Sub machine gun (Demonic Eagle)

Pump-action AK-47

Pump-action AK-47 Cut down into a pistol

Semi-auto Lee-Enfield

Vuvuzela with pistol grip and bayonet

A mall-ninja's horn?

[S&Wshooter]

Triple barrel break open Duckfoot pistol chambered for .357 Magnum

LeMat chambered for .38 special and .410 gauge

select fire CX4 Storm

Five-seveN with 2rd burst

.357 Magnum Sub machine gun

.50 AE Sub machine gun (Demonic Eagle)

Pump-action AK-47

Pump-action AK-47 Cut down into a pistol

Semi-auto Lee-Enfield

Vuvuzela with pistol grip and bayonet

They already make a pump action AK. Well, at least somebody has made a few
http://www.youtube.com/watch?v=Vl927obOpxU

[funkychinaman]

Realistically, a SA/DA single stack M1911, or a Hi-point carbine in 7.62 Tok.

If you want me to get crazy, handgun, .357 SIG, double stack, SA/DA with decocker, under $600.

[Swordfish941]

A double barreled grenade launcher.

[S&Wshooter]

A double barreled grenade launcher.

That would be friggin awesome.Grenade in one barrel, bigass shotshell like they had for the M79 in the other

[Swordfish941]

I got one: A Revolver chambered in .50 AE.

[S&Wshooter]

I got one: A Revolver chambered in .50 AE.

I saw one of those once. It was one of those commemorative guns they sell out of American Rifleman

[Nyles]

Semi auto Lee-Enfield? They made two, the British Howell (http://www.cybershooters.org/Royal%20Armoury/Howell.JPG)and the South African Rieder (http://www.delvillewood.com/rieders2.htm). There was also the New Zealand-made Charlton (http://img232.imageshack.us/img232/2498/charltonmgaa0.jpg), which was actually full auto.

There were also cartridge firing LeMats, a centerfire (http://www.horstheld.com/0-Lemat-25.htm)model in 11mm French Army or 12mm French Navy and 20 gauge. The earlier pinfire (http://www.horstheld.com/0-Lemat-123.htm)model was in 12mm and 14mm muzzle-loading shotgun.

[Markost]

The Charlton reminds me the Madsen Lmg with that big magazine.

[Nyles]

Well, the Madsen had a top-feeding mag, but yeah, I can definately see what you mean.

[funkychinaman]

Oh, and a modern handgun chambered in 7.62mm Tok. Glock or SIG Sauer can't get on this?

[Ermac]

repro of a type 1 ak47
http://www.imfdb.org/images/a/a0/AK-47.jpg

[BurtReynoldsMoustache]

repro of a type 1 ak47
http://www.imfdb.org/images/a/a0/AK-47.jpg

What would be the point?

[Yournamehere]

Eh, so us Americans could get ahold of one? Trying to get an old school Russian AK in America is insanely difficult if not impossible. If we could get them, we would be shooting a piece of history every time it was fired, or at the very least it could be mounted on a wall.

Now a 7.62mm Tokarev Glock or SIG, that doesn't make sense to me. What would be the point of that?

[predator20]

Now a 7.62mm Tokarev Glock or SIG, that doesn't make sense to me. What would be the point of that?

Surplus ammo is really cheap, like 10 cents a round. It's corrosive though. But after all the surplus dried up, prices would be the same as any other round. What would be the point then. I thought about picking up a case of 1200 rounds, even though I don't currently have a pistol chambered in that round.

[Gunmaster45]

Surplus ammo is really cheap, like 10 cents a round. It's corrosive though. But after all the surplus dried up, prices would be the same as any other round. What would be the point then. I thought about picking up a case of 1200 rounds, even though I don't currently have a pistol chambered in that round.

Without a dealer's liscense, owning more than a 1000 rounds of one type of ammunition is considered owning an arsenal, which is apparantly illegal. At least in NY anyways.

[predator20]

Without a dealer's liscense, owning more than a 1000 rounds of one type of ammunition is considered owning an arsenal, which is apparantly illegal. At least in NY anyways.

That sucks for New Yorkers. I like to keep at least 500 rounds each for most of my calibers. The only exception being .357 magnum, too costly.

I just bought a RIA 1911 in .38 Super, it comes with 900 rounds of FMJ and 250 HP. The ammo and 8 spare mags alone is worth the $650 I paid for everthing.

[S&Wshooter]

Without a dealer's liscense, owning more than a 1000 rounds of one type of ammunition is considered owning an arsenal, which is apparantly illegal. At least in NY anyways.

We used to buy 5x that much in one go, just for the AR's

[k9870]

more than 1000? Hell, 2 bulk packs of 22 is more than that.

[Yournamehere]

Surplus ammo is really cheap, like 10 cents a round. It's corrosive though. But after all the surplus dried up, prices would be the same as any other round. What would be the point then. I thought about picking up a case of 1200 rounds, even though I don't currently have a pistol chambered in that round.

10 cents a round? I didn't realize it was that cheap. It's still surplus and may not run well in guns that aren't surplus as well. 9mm is also roughly 20 cents a round, and you now have the most common cartridge on the planet and dozens upon dozens of different loads to use. If you want to pinch pennies, buy a Glock 17 and get a .22 conversion kit. Or just buy a .22 pistol to begin with. A current production gun in a cartridge like 7.62 Tok is just counterproductive.

That's weak about ammunition in NY. I've had more than a thousand rounds on more than one occasion, and it wasn't that much, most of it was .22 ammo. Guess that makes me a violent crazy murderer, at least in New York's eyes. Oregon represent!

[Nyles]

Well, except for the fact that 7.62mm Tokarev pushes a bullet to 1700 FPS and will penetrate soft body armor. The round has excellent killing power in general, and as far as I'm concerned is the best military handgun chambering ever made. I'd have carried my Tokarev in Afghanistan if they'd let me!

[Yournamehere]

I looked up the 1700 FPS and goddamn, I knew they were hot but not that hot. I still think I'd rather have a 9mm or .45 but that is definitely worth noting.

[k9870]

The tokarev is just availible with cheap ammo and has a cool muzzle blast, i want it as a recreational gun (i wouldnt use it for sel defense due to the lack of quality defensive ammo.)

[paraordnance]

An polymer framed 1911 style pistol with an internal safety and single action hammer, mag capacity would be 17 rounds of 9mm. It would also be fitted with a dual recoil spring.

[funkychinaman]

I'm the one who suggested the modern pistol in 7.62 Tok, and I thought someone who wanted to enjoy cheap, powerful ammunition shouldn't have to settle for a gun designed in the thirties and built to communist-bloc standards.

Okay, I didn't think about what would happen when the supply of cheap surplus ammo would dry up, but it'll be fun while it lasts.

[funkychinaman]

I'd also like to see someone like RIA bring back the Colt 1903/1908 Pocket Hammerless. And maybe even update it to 9x19mm. It's a nice and elegant CC pistol, one that doesn't look all plastic-y.

[Yournamehere]

Naw, you know who should bring them back? Colt. They make some of the dumbest decisions with regard to their civilian sales and bringing back any of their old pistols would be a step in the right direction.

[Nyles]

Now that's an idea I can get behind. Great little guns, though the design can't really handle 9mm Luger.

[funkychinaman]

Colt seems to be solely interested in wringing as much cash as they can out of the M1911 design. It's just weird that with so many companies making M1911 clones, you'd think one of them, especially one of the smaller ones, would try to distinguish itself by bringing back the Pocket Hammerless.

Colt recognized the demand for a small CC pistol, but went with the new Colt Agent instead, which is just a Colt Officer with an aluminum alloy frame, so they managed to poop on the legacies of two of their historical pistols all at once. SIG even made their own version of the Colt Mustang in the P238. And yet it never occurred to anyone that some people might want a Pocket Hammerless? Throw in the old school allure of Dillinger and Patton, and it's a no-brainer.

The only problem I can foresee that any new Pocket Hammerless, by Colt or anyone else, would be pricey. There's a lot of competition when it comes to .32 and .380 CC pistols, and modern guns are just smaller, cheaper, and lighter. That's why I said RIA, they'd probably make a more affordable version.

[funkychinaman]

And if a Kel Tec PF-9 can handle 9mm and still weight half as much, I don't see why a Pocket Hammerless couldn't.

I'm not against making a few modern tweaks. It has been over a hundred years, after all.

[Nyles]

Yes, but the Kel-Tec is a locked breech design, whereas the Pocket Hammerless is straight blowback.

[funkychinaman]

Crap. So it is. Oh well.

[Spades of Columbia]

A HK MP5-PDW in a 10mm with 30rd mags and tact rails for a surefire scout and a sexy predator style green laser. oh, and a Trijicon ACOG 1.5x16 with a green circle of death retical.

[BurtReynoldsMoustache]

A HK MP5-PDW in a 10mm with 30rd mags and tact rails for a surefire scout and a sexy predator style green laser. oh, and a Trijicon ACOG 1.5x16 with a green circle of death retical.

That would kick like a mule.

[Rockwolf66]

Lets see if I can get one of the transferable trigger groups in 9mm, 5.56mm and 7.62 Nato. Then lets see if I can add 7.62 Soviet, .40 S&W and 10mm Auto to the list of calibers. I had thought about designing such a weapon several years back for a Role playing game but it would get tricky IRL as MP5/10 parts don't mix well with MP5/9 parts other than the trigger group.

[BurtReynoldsMoustache]

Lets see if I can get one of the transferable trigger groups in 9mm, 5.56mm and 7.62 Nato. Then lets see if I can add 7.62 Soviet, .40 S&W and 10mm Auto to the list of calibers. I had thought about designing such a weapon several years back for a Role playing game but it would get tricky IRL as MP5/10 parts don't mix well with MP5/9 parts other than the trigger group.

How about an MP5 in 7.62 Tokarev?

[Ermac]

What would be the point?
Because it's like the first AK ever made.

[Mad Man 2.0]

How about a Wicked Lasers Spyder Carbinehttp://www.wickedlasers.com/lasers/Spyder_III_Pro_Arctic_Series-96-37.html other than that if somebody tried to make a full auto Kentucky Rifle they'd have my respect:D

[Bugabear]

How about a Wicked Lasers Spyder Carbinehttp://www.wickedlasers.com/lasers/Spyder_III_Pro_Arctic_Series-96-37.html

I thought we said no laser rifles?

If somebody like FN could make an MP7 chambered in Russian 9mm and use MP 443 mags that would be great. In terms of assault rifles if someone could make the Battle Rifle from Halo but in 7.62.

[BurtReynoldsMoustache]

In terms of assault rifles if someone could make the Battle Rifle from Halo but in 7.62.

http://world.guns.ru/sniper/sn75-e.htm

[funkychinaman]

The Assault Rifle in Halo is supposed to be 7.62x51mm NATO. Nice it see it still kicking after 500 years.

[S&Wshooter]

The Assault Rifle in Halo is supposed to be 7.62x51mm NATO. Nice it see it still kicking after 500 years.

Really? I must have got a copy of Halo where they switch all the Assault Riffles with .22's

[funkychinaman]

Really? I must have got a copy of Halo where they switch all the Assault Riffles with .22's

Is that the same copy where the pistol is the best weapon in the game?

[S&Wshooter]

Is that the same copy where the pistol is the best weapon in the game?

Why yes, yes it is

[Bugabear]

http://world.guns.ru/sniper/sn75-e.htm

oh my god... Did it say it takes Fal mags?


And in addition to the pistol being a sniper, the shotgun had no range and a 12 rd magazine.

[k9870]

Stainless revolver, like 686p, with rail. Revolvers are a common HD gun and lights are good in the role......smith has a railed revolver but its scandiu framed and only one model.

[S&Wshooter]

An American MP412 Rex

[BurtReynoldsMoustache]

Gyrojet SAW would be pretty cool.

[S&Wshooter]

Gyrojet SAW would be pretty cool.

If you could get it to shoot straight that would be the awesomest thing ever

[BurtReynoldsMoustache]

If you could get it to shoot straight that would be the awesomest thing ever

Not shooting straight makes it more awesome. Random rocket bullets fuckin' everywhere.

[S&Wshooter]

Not shooting straight makes it more awesome. Random rocket bullets fuckin' everywhere.

+10 pnts if a few hit an orphanage

[Mandolin1]

Not shooting straight makes it more awesome. Random rocket bullets fuckin' everywhere.
+10 pnts if a few hit an orphanage

Double points for wheelchairs!!!